|
ALUMINUM BREECHES
Crosman 2240, 2250, 2260, 1322,
1377, P1322, P1377, 362, 2300 line, 2400 line |
|
 I
am now in-house machining solid aluminum (and brass and steel) breeches. Given
that these are made on site, there is no Daisy buyout supply chain issues.
However, since I offer countless options below, they are typically made to order.
As usual, I am offering features found nowhere
else. Only at Alliance Hobby can you find:
-
Right Hand
(the bolt is on the right side of the gun
(incidentally, typically better for left-handed shooters)
-
Left Hand
(the bolt is on the left side of
the gun (incidentally, typically better for right-handed shooters)
-
Ambidextrous
(handle slots on both sides, you can switch
without disassembling the gun)
-
Lock Backs
(this is a downward slot in the rear position,
great for preventing the bolt from sliding forward when loading a pellet)
-
Talon Claws
(this is the fun castle nut-looking design on the
front of the breech)
-
Super Short, Short, Normal & Long Lengths
(3.75", 4", 5" and 6", respectively. The standard
Crosman Steel Breech is 6".)
-
 Normal & Hidden Screws
(The screw location under the bolt. Read more
here.)
-
LPA MIM & Discovery Cuts
(This lateral dovetail is exclusively for the LPA
MIM sight, which as of June 2025, has been out of stock for over six months.
A breech without the LPA MIM dovetails is called the Discovery Breech,
inspired from
a discontinued rifle that, for unknown reasons, never included them. The
Discovery-style breeches are a cleaner, more streamlined look and, desirable
if you're never going to install an LPA MIM.)
-
With or Without Longitudinal Dovetails
(The long dovetails that run from front-to-back,
used to mount scopes, red dots, etc. You almost always want these, unless
you have a specific, custom implementation in mind).
Video of brass, aluminum and my steel breeches.
5" Uncoated, Raw Aluminum, Right Hand Bolt, Discovery Cut
5" Uncoated, Raw Aluminum, Right Hand Bolt, Discovery Cut
5" Aluminum, Right Hand Bolt, Discovery Cut, Red Stardust Powder Coat
5" Aluminum, Right Hand Bolt, Discovery Cut, Red Stardust Powder Coat
Red Stardust Powder Coat Aluminum vs Brass
Red Stardust Powder Coat Aluminum vs Brass
  
These photos just show the length differences. This is brass and steel.
4", 5" and 6", respectively.
I have old listing pages for the aluminum breeches
here and here. I keep
them up for posterity. You can check them out if you like. |
